62 Seats and storage
r:!vfig. 62. Pull the head restraint out of the
backrest at the same time ¢
,A .
Installing the head restraints
.. Slide the posts on the head rest raint down
into the guides until you feel the posts click
into p lace.
.. Press the button @
<::?v fig. 62 and slide the
head restraint all the way down. You shou ld
not be able to pull the head restraint out of
the backrest.
So that the driver can have a better view to
the rear, the head restraints shou ld be pushed
down complete ly when the rear seats are not
occupied.
A WARNING
- Read and heed all WARNINGS
r:!v page 132, Proper adjustment of head
restraints.
- Only remove the rear seat head restraints
when necessary in order to install a chi ld
seat¢
page 175. Install the head re-
straint again immediately once the child
seat is removed. Driving wit hout head re-
straints or with head restraints that are
not properly adjusted increases the risk
of serious or fata l neck injury dramatical-
ly.
(D Tips
Correctly adjusted head restraints and
safety belts are an extremely effective
combination of safety features .
Seat memory
Description
Applies to vehicles: with memory function
The memory function a llows you to quickly
and eas ily store and reca ll personal seating
profiles for the dr iver. The memory function is
ope rated through the master key and the
memory buttons in the driver's door .
The driver's seating profile is stored and as-
signed to the master key each time the vehicle
is locked. When you open the door, the seat
profile is automatically recalled. If two peop le
use one vehicle, it is recommended that each
person always uses "their own" master key.
Up t o 2 seat profiles can be stored in t he
memory buttons in the drive r's door. Once
they are stored, these seat profiles can be se-
lected at any time .
In addition to the driver's seat settings, you
can a lso store and access the exterior mirror
adjustment settings* using the remote con-
trol key or memory button.
Remote control key
Applies to vehicles: wit h seat memory
To assign the driver's seat settings to the re-
mote control key when locking the veh icle, the
function must be act ivated in the rad io or
MMI*
.. Select:
!CARI function button > Seat adjust-
ment > Driver's seat > Remote control key >
on.Or
.. Select : !CARI function button> Car systems*
cont rol button > Vehicle settings > Seats >
Driver's seat> Remote control key > On.
@ Tips
If you do not want another driver's set-
tings to be assigned to the remote key,
switch off the memory function using the
radio or
MMI* or the IOFFI button
¢page 62.
· Memory buttons
Applies to vehicles: wit h seat memory
Fig. 64 Driver's door: memory funct ion buttons
To Next Page
Loading...
