.. Select: ICARI function button> Car system s*
control button > Driver assist > Speed
warning .
Warning threshold 2 can be set in the speed
range starting from
20 mph to 150 mph (30
km/h to 240 km/h). Settings can each be ad-
justed in intervals of
6 mph (10 km/h).
Cruise control
Switching on
The cruise control system makes it possible to
drive at a constant speed starting at 20 mph
(30 km/h).
®
f
®t
0
Fig. 100 Control lever with push-butt on
Fig. 101 Display: Selected speed
.. Pull the lever to position (!) ¢ fig. 100 to
switch the system on.
.. Drive at the speed to be controlled.
.. Press button @ to set that speed.
The stored speed and the green symbol
II (US model)/ &I (Canadian mode l) are
shown in the display
r::;,fig. 101 . The display
may vary, depending on the type of display in
your vehicle.
On t h e road 89
The speed is kept constant by modifying en-
gine power or through an active brake inter-
vention.
_& WARNING
- Always pay attention to the traffic
around you when the cruise control is in
operation. You are always responsible for
your speed and the distance between
your veh icle and other vehicles .
- For reasons of safety, cruise control
should not be used in the city, in stop-
and-go traffic, on twisting roads and
when road cond itions are poor (such as
ice, fog , gravel, heavy rain and hydro-
plan ing) - risk of accident .
- Turn
off the cruise control temporar ily
when enter ing turn lanes, highway exit
lanes or in construction zones .
- Please not e that inadverten t ly "resting"
your foot on the accelerator pedal causes
the cruise contro l not to brake. This is
because the cruise control is overridden
by the driver's acceleration.
- If a brake system malfunction such as
overheating occurs when the cruise con-
trol system is switched on, the braking
function in the system may be switched
off. The other cruise contro l functions re-
main active as long as the indicator light
II (US models) 1&1 (Canadia n models)
1s on.
@ Tips
- Vehicles with ma nual transmiss ion: You
can attain the set speed only if the gear
that is currently engaged will allow it, or
if it does not tax the engine and allows it
to run smoothly. Therefore shift int o a
higher or lower gear in a time ly manner.
- The brake light s illumina t e as soon as
the brakes app ly aut omatically.
Changing speed
.. To increase/decrease the speed in incre-
ments, tap the lever in the
0 10 direction
r::;, page 89, fig. 100. Ill>