56 Clear vision
Replacing the rear wiper blade
Applies to vehicles: with rear wiper
Fig. 55 Rear wipe r: Rem oving the wipe r blade
Removing the wiper blade
.. Fold the windshield wiper arm away from
the windshie ld .
.. Pull the wiper blade and holder out of the
mount .
Attaching the wiper blade
.. Press the wiper blade holder in the arrow di-
rection
~ fig. 55 into the mount .
.. Fold the w indshield wiper arm back onto the
windshield .
A WARNING
For safety reasons, the windshield wiper
blades should be replaced once or twice
each year.
Digital compass
Switching the compass on and off
Applies to vehicles: with digital compass
The compass direction is shown in the rear-
view mirror.
-
M
~
:!
"'
L;;.=== == ===~ll!
Fig. 56 Rearview mirro r: Digital compass activated
.. To switch the compass on or off, press and
hold the button @ until the compass dis-
play in the mir ror ~
fig. 56 appears or disap-
pears.
The digital compass only works when the igni-
tion is on . The directions are indicated with
abbreviations:
N (north), NE (northeast), E
(east), SE (southeast), S (south), SW (south-
west),
W (west), NW (northwest) .
@ Tips
To prevent inaccurate compass readings,
do not bring any remote controls, electri-
cal devices or metallic objects near the
mirror .
Adjusting the magnetic zone
Applies to vehicles: with digita l compass
The magnetic zone must be adjusted correctly
for the compass to read accurately .
@
Fig. 57 North Am erica: magnet ic deflection zone
bou nda ries
.. Press and hold the but t on @ ~ fig. 57 until
the number of the magnetic zone appears in
the rearview mirror .
.. Press the button @ repeatedly to select the
correct magnetic zone. The selection mode
turns off after a few seconds.
To Next Page
Loading...
