The values in the single-t rip or the total-trip
memory can all be reset to zero at the same
time under
Reset in the menu .
In addition, you can determine what informa-
tion from the trip computer should be shown
in the instrument cluster display. If one of the
pieces of driver information is turned
Off , that
driver information will not be shown in the
display. The information will continue to be
calculated by the trip computer and can be
turned back
On at any t ime .
(D Tips
- This function is not avai lab le on all
vehicles.
- The driving information in the efficiency
program is also reset to zero with the
s ingle-trip memory.
Gearshift Indicator
Applies to vehicles: with m anua l transmis s ion and gea r·
shift indica t or
This indicator con help conserve fuel.
~~~------------~~ ~.;;-
Fig. 12 Display: Gearshift indicator
m
~
~
a,
a,
In order to become familiar with the gearshift
indictor, at first just drive the way you are
used to. If t he current gear - and the driving
situa t ion - is not the best one for conserving
fuel, then the indicator will display the recom-
mended gear. The disp lay shows the current
gear and the gear that is recommended
¢fig. 12.
- Upshifting The display will light up to the
right of the gear currently selected if it is
recommending a higher gear.
Driver information display 2 7
- Downshifting:
The display will light up to
the left of the gear currently se lected if it is
recommending a lower gear.
Sometimes the indicator will recommend
skipping a gear (3
> 5).
If there is no gearshift recommendation, then
just dr ive in the appropriate gear for conserv-
ing fuel.
(D Note
This indicator can help you conserve fuel.
This indicator is not meant to show you
which gear you should always be in in all
driving situations . Sometimes, in situa-
tions such as passing, driving thro ug h
mountains or when towing a trailer, there
won't be any gearshift recommendation.
(D Tips
The display does not light up when the
clutch pedal is be ing depressed.
Efficiency program
Description
Applies to vehic les: with tr ip comp ut er with efficiency
prog ram
Fig. 13 Display: efficiency program
.. Press the I RESET I button @ ¢ page 26,
fig. 11 repeatedly until the efficiency pro-
gram appears in the display.
The efficiency program can he lp you to use
less fue l. It evaluates driving information in
reference to f uel consumption and shows oth-
er equipment influencing consumption as well
as shift recommendations. Fuel economy ...,
To Next Page
Loading...
