Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Coolant Level, Checking
WARNING
The cooling system is under pressure when the engine is warm.
Risk of scalding due to hot steam and hot coolant.
Scalding the skin and other parts of the body is possible.
– Wear safety gloves.
– Wear protective eyewear.
– Reduce the pressure by covering the coolant expansion tank
cap with a cloth and carefully opening it.
• Coolant level must be at “MAX” mark when the engine is cold.
• Coolant level may be above “MAX” mark with engine at oper‐
ating temperature.
– If necessary, fill the coolant again.
Tightening Specifications
♦ Refer to
⇒ “4.1 Overview - Radiator/Radiator Fan”, page 118
♦ Refer to ⇒ Body Exterior; Rep. Gr. 66 ; Noise Insulation;
Overview - Noise Insulation .
Audi A4 2015 ➤ , Audi A4 China 2016 ➤ , Audi A5 2016 ➤
4-Cylinder Direct Injection 2.0L 4V TFSI Engine (EA 888 Generation III) - Edition 11.2019
1. Coolant System/Coolant 99
To Next Page
Loading...
