Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
4 Fuel Injectors
⇒ “4.1 Overview - Fuel Rail with Fuel Injectors”, page 159
⇒ “4.2 Fuel Rail, Removing and Installing”, page 159
⇒ “4.3 Fuel Injectors, Removing and Installing”, page 159
⇒ “4.4 Fuel Injectors, Cleaning”, page 159
4.1 Overview - Fuel Rail with Fuel Injectors
Refer to ⇒ Servicing – 4-Cylinder 1.8L; 2.0L 4V TFSI Engine;
Rep. Gr. 24 ; Fuel Injectors; Overview - Fuel Rail with Fuel In‐
jectors .
4.2 Fuel Rail, Removing and Installing
Removing
– Observe the guidelines for clean working conditions. Refer to
⇒ Servicing – 4-Cylinder 1.8L; 2.0L 4V TFSI Engine; Rep. Gr.
00 ; Repair Information; Guidelines for Clean Working Condi‐
tions .
– Remove the intake manifold. Refer to
⇒ “3.2 Intake Manifold, Removing and Installing”, page 152 .
– Disconnect the connector -1- for the Fuel Pressure Sensor -
G247- .
– Remove the bolts -arrows-.
– Free up the wiring duct -2- from the fuel rail and remove the
fuel rail from the fuel injectors.
TIP:
If the fuel injectors stick in the fuel rail disconnect the connectors.
Installing
Refer to ⇒ Servicing – 4-Cylinder 1.8L; 2.0L 4V TFSI Engine;
Rep. Gr. 24 ; Fuel Injectors; Fuel Rail, Removing and Installing .
4.3 Fuel Injectors, Removing and Installing
Refer to ⇒ Servicing – 4-Cylinder 1.8L; 2.0L 4V TFSI Engine;
Rep. Gr. 24 ; Fuel Injectors; Fuel Injectors, Removing and In‐
stalling .
4.4 Fuel Injectors, Cleaning
Refer to ⇒ Servicing – 4-Cylinder 1.8L; 2.0L 4V TFSI Engine;
Rep. Gr. 24 ; Fuel Injectors; Fuel Injectors, Cleaning .
Audi A4 2015 ➤ , Audi A4 China 2016 ➤ , Audi A5 2016 ➤
4-Cylinder Direct Injection 2.0L 4V TFSI Engine (EA 888 Generation III) - Edition 11.2019
4. Fuel Injectors 159