Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Loosen the hose clamp -arrow- on the left coolant pipe and
remove the coolant hose.
Vehicle with Manual Transmission:
– Lift the clamp -1- and remove the coolant hose.
Continuation for All Vehicles:
– Remove the connector -2- from the bracket and disconnect it.
– Disconnect the connector -1- from the engine control module.
– Free up the wiring harness and place on the engine.
– Release the retainer in direction of -arrow- and remove the
vacuum hose -1-.
Audi A4 2015 ➤ , Audi A4 China 2016 ➤ , Audi A5 2016 ➤
4-Cylinder Direct Injection 2.0L 4V TFSI Engine (EA 888 Generation III) - Edition 11.2019
14 Rep. Gr.10 - Engine Assembly
To Next Page
Loading...
