Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove the bolt -arrow- from the catalytic converter bracket.
– Remove the catalytic converter nut -2-. (The nuts -1- will be
removed later.)
– Remove the lower cover -1- from the transmission in direction
of -arrow-.
– To loosen the bolts for the flywheel, counterhold the crankshaft
using the -T40263- and -T40314- .
CAUTION
Risk of Damaging the Engine by the Timing Mechanism Skip‐
ping
– Only let the engine turn in the direction of engine rotation.
– Turn the crankshaft an additional 120° respectively in the di‐
rection of engine rotation -arrow-.
Audi A4 2015 ➤ , Audi A4 China 2016 ➤ , Audi A5 2016 ➤
4-Cylinder Direct Injection 2.0L 4V TFSI Engine (EA 888 Generation III) - Edition 11.2019
1. Engine, Removing and Installing 23
To Next Page
Loading...
