26 In struments and warning /i ndicator lights
Resetting values to zero
.,. Select t he on-board computer / Efficiency
program men u item in t he Vehicle func-
tions
menu.
.,. You can now select between the long-term
memory and short -term memory .
.,. To reset the values in a memory, press and
hold the thumbwhee l @ for one second.
Assigning a function to the
programmable steering wheel button*
.,. Select : ICAR!funct ion button> (Car)* sys-
tems
control button > Vehicle settings >
Steering wh eel button .
The last function selected displays when you
switch the ignition on.
On-board computer
You can call up the following information in
the on-board computer:
- Date
- Driving time (h) from t he short- t erm memo-
ry
- Average consumption in MPG (l/ 100 km)
from t he short-term memo ry
- Average speed in mph (km/h) from the
short-term memo ry
- Distance driven in m iles (km) from the
short-term memory
- Current fuel consumption in MPG (l/100
km)
- Short-term memo ry overview
- Long-term memory overview
The short-term memo ry coll ects dr iving info r-
mat ion from the time the ignit ion is switched
on until it is switched off. If yo u continue dr iv-
ing within two hours after switching the igni-
tion off, the new values are included when cal-
culating the current trip informa t ion.
Unlike the short-term memory, the long-term
memory is not erased automatica lly. You can
select the time period for evaluat ing trip in-
formation yo urself.
For some vehicle functions, you can access the
tr ip informat ion from the tempora ry memory
in the line
(D ¢ page 24, fig. 5.
The current fue l consumption can be dis-
played using a bar
¢ page 27, fig. 10. The
average consumption (mpg) stored in the
short-term memo ry is also displayed. Electri -
cal energy can be sto red in the battery when
t he vehicle is coasting or dr iving dow nhill (re-
cuperat ion) . The bar will move t oward
Cl .
Efficiency program
The efficiency program can help you to use
less fuel.
It evaluates driving information in
reference to f uel consumption and shows ot h-
er equipment influencing consumption as well
as shift recomme ndat ions.
¢ page 26. Fuel
economy messages
<=:> page 2 7 provide t ips
f or efficient driving. The effi ciency program
uses dist ance and consumpti on data from tr ip
com put er
1.
To display th e eff iciency program, call up Ve-
hicle functions and select t he menu opt ion
Efficiency program. If the data are delet ed in
t he eff iciency prog ram, th ose values are also
reset in tri p com puter .
@ Tips
- All st ored values will be lost if th e vehi-
cle battery is disconnected .
- Fuel consum pt ions (average and cur-
rent), range and speed are displayed in
metric units on Canadian mode ls.
Other equipment
Fig. 8 Trip comp uter: ot her equipment
Require ment: The efficiency program must be
displayed
<=:> page 26 .
.,. Turn the thumbwheel unt il the other equip-
ment appears in the display. .,.
To Next Page
Loading...
