EasyManua.ls Logo

Audi A6 2016 - Page 110

Audi A6 2016
294 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Automatic transmi ss io n
than 2 seconds when the brake pedal is not
pressed.
Lock button
The lock button in the selecto r lever hand le pre-
vents you from moving the selector lever un in-
tentionally while in some se lector lever positions .
The positions that require the lock button to be
pressed are marked in color in the illustration
¢ fig. 116 .
Driving the automatic transmission
Starting the engine
~
The selector lever must be in P or N.
Starting off
~
Press and hold the brake pedal.
~
Press and hold the release button in the selec-
tor lever handle, se lect the des ired selector lev-
er position such as D/S and release the button.
~
Wait briefly until the transmission has shifted
(you w ill feel a slight movement).
~
Remove your foot from the brake pedal and ac-
celerate .
Stopp ing t emporar ily
~
Keep the vehicle stationary using the braking
pedal , for example at traffic lights .
~
Do not press the accelerator pedal when doing
th is .
~
To prevent the vehicle from rolling when you
start driving, set the park ing brake when stop-
ping on steep inclines ¢ ,& .
~
The pa rking brake w ill re lease automatically
and the vehi cle will start moving once you press
the accelerator pedal.
Stopping / parking
If the se lector lever is not in the P posit ion when
you open the d river's door, the vehicle could roll.
The message
Transmission: Car may roll! Shift
to park!
appears .
~
Press and hold the brake pedal unt il the vehicle
has come to a complete stop.
~
Apply the pa rking brake ¢ page 77, Parking .
~
Se lect the P selector leve r position ¢ ,& .
108
Stopping on an incline
~
Always press the brake pedal to ho ld t he vehi-
cle in place and prevent it from "rolling back"
¢
,& . Do not try to prevent the vehicle from
"rolling back" when a gear is engaged by in-
creas ing the engine speed ¢ (D .
Starting on an incline
~
Activate the pa rking br ake.
~
With the driving gear selected, press the accel -
erator pedal carefully. The parking brake will
release a utomatically if your seat belt is fas-
tened.
Under certain circumstances, such as driving in
the mountains, it may be useful to switch tempo-
rarily to the manual sh ift program in order to ad-
j ust the gears to the dr iving cond it ions by hand
Q ,&..
On slopes, activate the parking brake first and
then move the selector lever to the P position.
This prevents too much stress from being placed
on t he locking mechanism.
A WARNING
- The vehicle can also roll when the eng ine is
stopped .
- Unintended vehicle movement can cause se-
rious injury .
- Never leave your veh icle with the engine
running while in gear. If you must leave
your veh icle when the eng ine is running, ac-
tivate t he pa rking bra ke a nd move the selec-
to r lever t o P.
- Powe r is still transmitted to the wheels
when the engine is runn ing at idle . To pre-
ve nt the vehicle fr om "creeping ", yo u m ust
keep your foot on the brake when the en-
gine is running and t he se lector lever is in D/
5 or R or "tiptronic" mode is se lected .
- Do not press t he acce le rator peda l when
changing the se lector lever posit ion while
the vehicle is stationary and the engine is
running.
- Never sh ift into R or P whi le driving.

Table of Contents

Related product manuals