Audi A6 2024 - Page 148

Driver assistance
~The sensor coverage area and the area view
© fig. 103 are schematic diagrams that do
not display actual dimensions.
= Applies to: vehicles with area view: Objects
approaching from behind will be depicted as
vehicles, regardless of the actual object
type.
Using adaptive cruise assist
Applies to: vehicles with adaptive cruise assist
[raz-000
4
84M.0232
Fig. 105 Operating lever: changing the speed
Switching on
> To switch on the adaptive cruise assist, pull the
lever up to position @ until it engages.
Storing the speed and activating regulation
If you have switched the system on, you can set
the current speed as the “regulated speed” and
activate regulation:
button @). The set speed is indi-
cated with a marking in the speedometer @)
=> page 144, fig. 102 and shown in the instru-
ment cluster /\.
» To save the speed while the vehicle is station-
ary, also hold the brake pedal down.
146
You can set any speed between 15 mph
(20 km/h) and the maximum possible speed
range @) > page 144, fig. 102.
Pausing cruise control
The control can be stopped at any time:
» While driving or when the vehicle is stationary:
Press the lever away from you in the direction
of the arrow, or
» While driving: Press the brake pedal.
The [if indicator light turns off.
Resuming regulation
The previously set speed can be resumed at any
time after a pause.
» To resume cruise control while driving, pull the
lever toward you in the direction of the arrow.
» To resume cruise control when stationary, pull
the lever toward you in the direction of the ar-
row while pressing the brake pedal.
Changing the speed
» To increase or decrease the set speed in smaller
increments, briefly tap the lever toward @ or
Oto the first level.
» To increase or decrease the set speed in larger
increments, briefly tap the lever toward @ or
© to the second level.
» To increase or decrease the set speed continu-
ously, hold the lever toward @) or © until the
marking in the speedometer @) > page 144,
fig. 102 has reached the desired speed.
Applies to: vehicles with predictive control: Pre-
dictive control can automatically adjust the set
speed based on traffic and road condi-
tions > page 149.
Preselecting a speed
You can also preselect the speed when adaptive
cruise assist is not active by moving the lever in
the desired direction @/O. Activate the previ-
ously selected speed by pulling the lever toward
you in the direction of the arrow.
OwnersManuals2.com