Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
17 - Seal
❑ Replace if damaged
❑ Lift out with screwdriver to replace
❑ Press in by hand
18 - Seals
❑ Replace
19 - Support ring
❑ Make sure it is seated properly
❑ The fuel rail wields force via support ring to hold fuel injector tightly in cylinder head.
20 - O-ring
❑ Replace
❑ Moisten with clean engine oil
21 - Spacer ring
❑ Replace if damaged
22 - Radial adjustment
❑ Replace if damaged
❑ Clip with support ring -19-
23 - Combustion chamber seal
❑ Replacing ⇒ “5.4 Fuel Injectors”, page 35 .
24 - Fuel injector
Removing and installing ⇒ page 35 .
Audi A6 2005 ➤
Fuel Injection and Ignition - Edition 03.2008
2. Description and Operation 19
To Next Page
Loading...
