Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Display on -VAS 5051- :
1 - Selection of diagnostic functions
– In selection -1-, press diagnostic function “04- Basic Setting”.
Display on -VAS 5051- :
– Select “140” in button field -2- for “display group 140” and con‐
firm input by pressing Q button.
Display on -VAS 5051- :
Example:
1 - 42%
2 - 39.76 bar
3 - 40.63 bar
4 - Inactive
– Activate basic setting by pressing button A .
Display on -VAS 5051- :
Example:
1 - 0%
2 - 0 bar
3 - 5.46 bar
4 - Lower
The fuel rail will continue to be filled with fuel, but it will no longer
be under high pressure.
Now components or lines can be opened. A clean rag must be
placed around connection points. Escaping fuel must be absor‐
bed.
– In operating mode “Guided Fault-Finding”, generate readiness
code for Engine Control Module (ECM) ⇒ Vehicle diagnosis,
testing and information system VAS 5051.
Audi A6 2005 ➤
Fuel Injection and Ignition - Edition 03.2008
4 Rep. Gr.24 - Fuel injection system
To Next Page
Loading...
Need help?
General
