a,
a,
.....
N
r-.
N
.....
0
a,
OJ
..
® Mud and snow capability
"M/5" or "M+S" indicates the tire
is suitable for driving on mud and
snow. £ indicates a winter tire.
@ Composition of the tire cord
and materials
The number of plies indicates the
number of rubberized fabric lay-
ers in the tire . In general: the
more layers, the more weight a
tire can carry. Tire manufacturers
must also specify the materials
used in the ti re . These include
stee l, nylon, polyester and other
materials.
@ Maximum permitted load
This number indicates the maxi-
mum load in kilograms and
pounds that the tire can carry.
@ Uniform tire quality grade
standards for treadwear,
traction and temperature
resistance
Tread wear, traction and temper-
ature ranges¢
page 229 .
@ Running direction
The arrows indicate the running
direction of unidirectional tires.
You must always follow the speci-
fied running direction
¢page 248 .
~
Maximum permitted
inflation pressure
Wheels
This number indicates the maxi-
mum pressure to which a tire can
be inflated under normal operat -
ing conditions .
Glossary of tire and loading
terminology
Accessory weight
means the combined weight (in
excess of those standard items
which may be replaced) of auto-
matic t ransmission, power steer -
ing, power brakes, power win-
dows , powe r seats, radio, and
heater, to the extent tha t these
items are avai lab le as factory- in-
stalled equipment (whether in-
st alled or not).
Aspect ratio
means the ratio of the height to
the width of the tire in percent.
Numbers of 55 or lower indicate a
low sidewall for improved steer-
ing response and better overall
handling on dry pavement .
Bead
means the part of the t ire that is
made of steel wires, wrapped or
reinfo rced by ply cords and that is
shaped to fit the rim. ...
2 1 3
To Next Page
Loading...
