S ea ts and s tor a ge
Rear head restraints
Applies to: vehicles with adjustable head restraints
/
Fig. 49 Rear seat: adjust ing the head restra int
Fig. SO Rear seat: remov ing t he head res t raint, release
point
The rea r seat head restraints must be ra ised to
the highest posit io n when passenge rs ride in the
rear seats
¢ A in Proper adjustment of head re-
straints on page 133
Adjusting the head restraints
"' To move the head rest raint up, ho ld it at the
s ides wit h both hands a nd slide it upward unt il
you fee l it click into place.
"' To move the head restraint down, press the
button (arrow)
¢ fig . 49 and slide the head re-
straint downward.
Removing th e head rest raints
.. Fold the backrest forward ¢ page 55.
.. Move the head restraint upward as far as it can
go .
.. Press the release point c> fig. 50 using the me-
chanical key and press the button
c> fig. 49. Pull
the head restraint out of the backrest at the
same t ime ¢ _&..
50
Installing the head restraints
"' Slide the pos t s on t he head restra int down into
the guides until the posts click into place.
"' Press the button (arrow)
¢ fig. 49 and s lide the
head restraint all the way down . You shou ld not
be able to pull the head restraint out of the
backrest without pressing the button.
A WARNING
- Always read and follow the applicable warn-
ings
c> A::. in Proper adjustment of head re-
straints on page 133.
- Only remove the rear seat head restra ints
when necessary in orde r to insta ll a ch ild
seat. Install the head restraint again imme-
diately once the child sea t is removed . Driv-
ing with the head restraints removed or no t
in the upright position increases the risk of
ser ious inju ry.
Memory function
Description
Applies to : vehicles with memory function
Using the memory function, you can quickly and
easily store a persona l seat profile for the driver
and front passenge r and recall the sett ings. The
memory funct ion is contro lled using t he remote
contro l key and the memory buttons in the driv-
er's/front passenger's door *.
The driver's seat prof ile is stored again and as-
s igned to t he remote control key each t ime the
vehicle is locked . When you open the door, the
seat profile is automatically reca lled . If two peo -
ple use the vehicle, it is recommended that each
person always uses the ir "own" remote control
key .
Two seat profiles can be stored using the memo-
ry buttons in the driver 's/front passenge r's
door *. Once they are stored, these seat profiles
can be selected at any time.
The following settings are stored:
To Next Page
Loading...
