co
co
....
N
"
N
....
0
00
<..:l
'SI'
could start the engine or operate electrical
equipment such as power windows.
(D Tips
- The operation of the remote control key can
be temporarily disrupted by interference
from transmitters near the vehicle working
in the same frequency range (such as a cell
phone or radio equipment).
- Using the mechanical key, you can:
- Lock/unlock the glove compartment.
- Manually lock/unlock the vehicle
¢ page 32 .
- Mechanically lock the doors¢ page 32.
- For an explanation on conformity with the
FCC regulations in the United States and the
Industry Canada regulations, see
¢ page 267.
Removing the integrated mechanical key
Fig. 16 Remote contro l maste r key: remov ing the mech an i-
cal key
• Press the release button @ ¢ fig. 16.
• Pull the mechan ical key @ out of the remote
contro l key.
Open in g and closing
LED and batteries in the remote control key
Fig. 17 Remote control key: removing the ba ttery holder
LED in the remote control key
The LED@ informs you about the function of the
remote control key.
• If you press a button briefly, the LED blinks
once .
• If you press and hold a button longer (conven-
ience opening), the LED blinks several times.
"' If the LED does not blink, the remote control
key battery is dead . The
1:1 indicator light and
the message Please change key battery ap-
pear . Replace the battery in the remote control
key.
Replacing the remote control key battery
"' Remove the mechanical key ¢ page 29 .
"' Press the release button @ on the battery
holder and pull the battery ho lder out of the re-
mote control key in the direct io n of the arrow
at the same time.
• Insert the new battery with the"+" symbol fac-
ing down.
• Slide the battery holder carefully into the re-
mote control key.
"' Insert the mechanical key.
@) For the sake of the environment
Discharged batter ies must be disposed of us-
ing methods that will not harm the environ-
ment . Do not dispose of them in household
trash.
29
To Next Page
Loading...
