co
co
....
N
"
N
....
0
00
<..:l
'SI"
Programming buttons
Applies to: vehicles with garage door opener (Homelink)
Fig. 32 Headliner: contro ls
You can program bot h f ixed code and rol ling code
systems using this procedure .
Programming / reprogramming button s
• Switch the ignition on .
.. Press and hold the button in the head liner that
you wou ld like to program for at least 10 sec-
onds. Or
• Se lect:
~I C~A~R~I funct ion button > (Car)* Systems
contro l button > Vehicle setting s > Garage
door opener > Program garage door opener .
.. Follow t he ins t ruc t ions in the Infota inme nt sys-
tem .
Deleting button programming
The programmed but tons cannot be de leted ind i-
vid ually . They must be deleted all at once. Repro-
g ram t he bu ttons if necessary .
.. Se lect: the
ICARI fu nction button > (Car)* Sys-
tems
control button > Vehicle settings > Ga-
rage door opener
> Clear program settings >
Yes.
Displaying the version / status/country code
.. Se lect: I CAR I funct ion button > (Car)* Systems
contro l butto n > Vehicle settings > Garage
door opener > Version information .
(D Tips
The garage door opene r may need to be
synchronized with the-system motor after the
programming . Follow the manufacture r's in-
st ructions for do ing th is.
Open ing and closing
Operation
Applies to: vehicles with garage door opener (Home link)
Requireme nts : t he button in the headliner m ust
be program med<>
page 39 and t he ve hicle m ust
be wit hin ra nge of the system, such as the ga rage
doo r.
• Press the bu tton to ope n t he garage door. The
LED @ <>
page 39, fig . 32 blink s or tur ns on .
• Press t he bu tton again to open the ga rage
door.
@ Tips
When opening or clos ing the gara ge door, do
not press and hold t he button lon ger ten sec -
o nds or the garage door opener will switch to
programming mode.
39
To Next Page
Loading...
