Light s and Vision
Messages in the instrument cluster display
Headlight assist: System fault !
Drive to an authorized Audi dealer or authorized
Audi Service Facility immediately to have t he
malfunct ion corrected. You can still switc h the
high beams on or off manually.
Headlight assist: Unavailable No camera view
The camera view is blocked, for example by a
sticker or debris.
The senso r is located between the interior rear-
view mirror and the windshield. Do not place any
stickers in th is area on the windshield.
A WARNING
High beam assistant is only intended to assist
the driver . The driver is still responsible for
cont rolling the head light s and switching
t hem manually depend ing on light and visibil-
ity condition s. It may be necessary t o operate
th em man ually in situ at ions such as:
- In adve rse weathe r cond it ions such as fog,
heavy ra in, blowing snow or sp raying water.
- On roads where oncoming tr affic may be
partially obscu red, such as expressways.
- Whe n there are road users t hat do not have
sufficient light ing, such as bicyclers or
vehicles with dirty ta il lamps.
- In tight curves and on steep hills.
- In poorly lit areas .
- With strong reflectors , such as signs.
- If the area of the windshield near the senso r
is fogged over, dirty, icy or covered with a
sticker.
Adjusting the exterior lighting
The funct ions are adjusted in the Infotainment
system.
~
Select : I CARI functio n button> (Car)* Systems
contro l button > Vehicle settings > Exterior
light ing.
Automatic headlights
You can adjust t he following settings in t he Au-
tomatic headlight s
menu:
42
Activation sensitivity - you can adjus t if the
headlights switch on
Early, Medium or Late ac-
cording to the sensit ivity of the light sensor.
Auto-dimming high beams* - you can switch t he
high beam assistant *
On and Off .
Daytime running lights*
USA models:
the daytime running lights can be
switc hed on/off. Select
On or Off .
Canada models:
this function cannot be switched
off. They act ivate automatically each time the ig-
nit ion is switched on.
Coming home, Leaving home
The coming home function illuminates the area
outside the vehicle when you turn the ignition off
and open the driver's door . To turn the function
on, select
Lights when leaving car > On.
The leaving home illuminates the area outside
the vehicle when you unlock the vehicle . To turn
the function on, se lect
Lights when unlocking
car > On.
The coming home and leaving home functions
on ly operate when it is dark and the light switch
is in the
AUTO pos ition .
Emergency flashers
---- - --
Fig. 35 Center conso le: emergency flasher button
The emergency flashe rs makes other drivers
aware of your vehicle in dangerous situations.
~
Press the ~ button to switch the emergency
flashers on or off .
You can indicate a lane change or a tur n when the
emergency flashers are switched on by using the "'
To Next Page
Loading...
