co
co
....
N
"
N
....
0
00
<.,;)
'SI"
Luggage compartment cover
The luggage compartment cover consists of two
parts .
.....
0:,
0
'
\
0
CJ
0
d ~
Fig. 64 Cover in t he ope n luggag e compar t me nt lid
Fig. 65 Cover behin d the rear ben ch seat
Removing the cover in the luggage
compartment lid
~
Remove the knobs CD¢ fig. 64 from the ball
mounts.
~
Pull the cover @ out of the retainers @ in the
direction of the arrow.
Install ing th e cover in the luggag e
compartment lid
~
Slide the cover upward into the retainers @ .
~
Press the knobs CD onto the ball mounts.
Removing th e cover behind the rear bench
seat
~
Pull the cover ¢ fig. 65 back.
~
Pull the cover upward to release.
Install ing the cover behind the rear bench
seat
~
Place the left and righ t sides of the cover into
the mounts on the side t rim .
~
Slide the cover forward until it locks into place .
Seats and storag e
A WARNING
-
- To reduce the risk of accidents, never install
the luggage compartment cover without se -
cur ing it .
- The luggage compartment cover is not a
surface for stor ing objects . Objects placed
on the cover could endange r all ve hicle oc-
cupa nts dur ing sudden bra king maneuve rs
or in a cra sh .
(D Note
The defogger and antenna wires in the rear
window can be damaged by objects on the
luggage compartment cover rubbing against
them .
Storage hooks
Applies to: vehicles with bag hooks
Fig. 66 Lugg age compar tm ent: st orage hooks
You can also use the hooks to hang light purses,
bags , etc.
A WARNING
-
The hooks can ho ld a maximum weight of 6.6
lbs (3 kg) . Heavier objects are not adequate ly
secured . There is risk of persona l injury.
57
To Next Page
Loading...
