___ w_ a_rm __ a_n_ d_ c_o_ld __________________________________________________ _
Controls
This overview will help you to familiarize yourself with the
air conditioning controls.
Fig. 129 Air condit ioning control elements
The left display indicates the temperature selected for the driver's
side, the right display indicates the temperature selected for the
passenger 's side.
The settings you make are shown in the MMI disp lay for a few
seconds when
MMI is turned on.
Each function is turned on or off by briefly pressing the corre -
sponding button . The indicator light in the button illuminates when
the function is active.
But- Fun c t ion
II Page
ton (s)
ION/OFF)
Turning on and off
~
page 117
Automatic mode
~
page 117
Contro l Temperature selection
~
page 717
knob
Q)
Heated seats*
~
page 118
8
@
Ventilated seat s* => page 118
00
Air distribution => page 120
~
Defrost
~
page 120
=> page 723
00
Fan => page 120
~
Manual recirculation
~
page 721
@@
Heated rear window
~
page 124
!SETUP)
Basic settings
=> page 126
[ i ] Tips
• Residual heat : With the ignition turned off, you can activate the
residual heat function by pressing the
I ON/OFF ) button. The
residual heat from the coo lant can be used to heat the vehicle inte -
rior. The residua l heat function is turned off automatically after 30
minutes.
• Synchroniz ing clim at e control: By press ing and ho lding the
control knob on the driver's side, the temperature setting on the
driver's side can be switched to the passenger's side , and vice versa.
In the case of vehicles with rear air conditioning*, the selected
t emperature setting is also app lied to the outer rear seats. The new
temperature is shown in the display. •
To Next Page
Loading...
