EasyManua.ls Logo

Audi A8 2008 - Audi Lane Assist; Lane Assist

Audi A8 2008
404 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Audi lane assist -
_____________________ __.
Audi lane assist
Lane assist
Applies to vehicles: with lane assist
Description
Lane assist helps you keep your vehicle in your lane.
Lane assist uses a camera to detect lane boundary lines. If the
system detects that your vehicle is about to leave a lane boundary
line, the steering wheel vibrates to alert the driver. If lane assist
detects boundary lines on both sides of the vehicle's lane, the
system enters active standby mode, which is indicated by the green
indicator light / :\ on the instrument cluster.
If the system is in active standby mode and the turn signal is acti-
vated before driving over the boundary line, the warning does not
occur since the system allows for intentional lane changes.
The system is designed for driving on freeways and expanded high-
ways and thus works only at speeds of 40 mph (65 km/h) or more.
& WARNING
Lane assist will not keep your vehicle in your lane. The system
only warns the driver when the vehicle is leaving the lane. The
driver is always responsible for keeping the vehicle in the lane.
The camera is not able to detect all lane boundary lines and in
some cases might also detect lane structures or objects as
boundary lines. This can lead to incorrect warnings or warnings
that fail to go off at all.
The camera's visibility can be impaired by vehicles ahead of
you, for instance, or by rain, snow, heavy spray or light shining into
the camera lens. This can cause lane assist to fail to detect
boundary lines.
Controls and equip-
ment
Applies to vehicles: with lane assis t
Activating and deactivating
Fig. 168 Turn signal
lever: Lane assist
button
Fig. 169 Windshield:
Lane assist camera
viewing window
Press the :::> fig. 168 button to activate or deactivate the
system. The/:\ indicator light on the instrument cluster
will illuminate or go out.
Instrument cluster indicator light
/ :\ Ready: The green indicator light shows that the system is ready
to use. A warning alerts the driver when the vehicle drives over
detected lane boundary lines. .,.
Vehicle care
I I
irechnical data

Table of Contents

Related product manuals