Cl e ar vision
High b e am
~D
Push the lever forward to switch on the high beam.
- Pull the lever back towards you to switch off the high
beam .
Headlight flasher ~D
- Pull the lever toward the steering wheel to use t he head-
light flasher .
Note s on t he s e feature s
• The turn signals only work with the ignition turned on . The indi-
cator lights ¢ or ¢ in the instrument cluster ~ page 16 also blink .
• After you have turned a corner, the turn signal switches off auto -
matical ly.
• The high beam works only when the head lights are on . The indi -
cator light ~D in the instrument cluster illuminates when the high
beams are on.
• The headlight flasher works only as long as you hold the lever -
even if ther e are no lights turned on. The indicator light ~D in the
instrument cluster illuminates when you use the headl ight flasher.
• With the switch in the
AUTO position, the high beams can only
be turned on if the function is switched on in MM I
=> page 70.
0 Note
Do not use the high beam or headlight flasher if you know that these
could blind oncoming traffic . •
Interior lights
Front interior lights
The in terior lights include rea ding ligh ts for both the
driver and the fron t passenge r.
- -
1111
, I I, . II
-
~
•
'
'.(ZW
ro ,1@1
111111111
0
Interior lights
-
®
111111111
...
/!
111111111
0
Fig. 63 Rooflining:
Front inter ior lights
Fig. 64 Rooflining:
Front readin g lights:
- Press the @J button to t ur n off the interior lights
~
fig . 63. If you p ress the b utt o n a secon d time, the inte-
rio r ligh t s in th e rear are also t ur ned off .
- Press the
(ID butto n to turn on the door contact circui t.
Press the button a second t ime t o tur n on the door
contact circ uit f or the rear doors .
To Next Page
Loading...
