EasyManua.ls Logo

Audi A8 2008 - Electromechanical Parking

Audi A8 2008
404 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
___ O_n_t_h_e_ro_ a_d __________________________________________________ _
Electromechanical parking brake
Operation
The electromech ani ca l parking brake replaces the hand
brake.
Fig. 148 Cente r
console: Parking brake
Pull the switch to app ly t he parking brake==> fig. 148. The
indicator light in the sw itch will come on.
Step on t he brake pedal or t he acce lerator pedal and
press th e switch at the same time to rel ease the parking
brake . The indicator light in t he switch w ill go out .
Your vehicle is equ ipped w ith an electromechanical parking brake
which replaces the handbrake . The parking brake is designed to
prevent t he vehicle from rolling unintentionally .
In addition to the norma l f unctions of a trad itiona l hand brake, the
electromechanical parking brake provides various convenience and
safety functions.
Em e rg e n cy brake
An emergency brake ensures that the vehicle can be slowed even if
the
normal brakes fa il => page 136, "Emergency braking".
Indi c at o r light s
If the parking brake is app lied with the ignition turned on, the
indicator light in the instrument cluster (U.S. models:
::i, Canadian
models: © ) and in the switch © will come on .
If the parking brake is applied with the ignition
turned off, the
indicator light in the instrument cluster (U.S. models : ~~. Canadian
models : (®)) and in the switch (®) will come on for about 30 seconds
and then go out.
& WARNING
If the vehicle is stati onary and the transmis sion is engaged with
the engine runnin g, th e engine should not be speeded up (e.g.
manu ally from under the hood). Otherw ise the vehicle w ill start to
move - you run the risk of an accident .
0 Note
If the warning/indicator light (U.S. models: BRAKE, Canadian models:
«D>) flashes in the instrument cluster, there is a brake system
malfunction . By pressing the
I CH ECK] button , you can bring up a
driver message which explains the malfunction in more detail. If the
message
Parking brake! Please contact w orkshop appears, there is
a parking brake malfunction which you should have repaired imme -
diate ly by an authorized dealership =>
page 30.
[ i ] Tips
You can app ly the parking brake at any time - even with the igni -
tion turned off . The ignition must be turned on in order to release
the parking brake.
Occasional noises when the parking brake is applied and
released are norma l and are not a cause for concern .
The parking brake goes through a self-test cycle at regular inter -
vals - when the vehicle is parked. Any associated no ises are
normal.

Table of Contents

Related product manuals