llffl!I What do I do novv?
'---------------------------------------------
Tools
The vehicle tools are stored in the luggage compartment
lid.
Fig. 281 Trunk lid:
Opening the cover
Fig. 282 Trunk lid:
Vehicle tools
- To open the cover, turn the retainer in the direction of the
arrow and pull the cover down
~
page 350, fig. 281.
The onboard tool kit includes:
• Hook for removing wheel covers *
• Plastic hook to remove wheel bolt covers
• Whe el bolt wr ench
• Alignment pin for changing wheels
• Screwdr iver with reversible blade
• 10 x 13 open ended wrench
• Towing loop
[ i ] Tips
Some of the on board items listed above are provided on certain
models only or are optional extras . •
Spare wheel
The spare wheel is stored in the wheel well underneath
the floor panel in the luggage compartment.
Fig. 283 Luggage
compartment spare
wheel
Your vehicle is equipped with a regular spare wheel. It is
held in place by plastic retaining knurled screw.
Taking out the spare wheel
- Raise the floor panel at the plastic handle.
- Securely engage the handle in the luggage compartment
seal as illustrated to keep the floor panel up.
- Unscrew the knurled retainer bolt in the wheel center
~
fig. 283. Turn it counter-clockwise .
- Take out the spare wheel.