Audi A8 2015 - Page 30

28 In struments and warning /i ndicator lights
the appropriate service on your vehicle. You
also have the possibility to reset the oil
change schedule after having performed an
oil change according to Audi specifications.
Select the
!CAR! function button> Car sys-
tems
control button > Servicing & checks >
Service Intervals > Reset oil change interval.
(D Note
- Only reset the oil change display when
you have completed an oil change.
- If you disconnect t he battery term inals,
no calculations can be made for the serv-
ice interva l display during this t ime and
no service rem inder w ill appear. Remem-
ber t hat observing the proper service in-
te rvals is vitally impor tant t o extendi ng
the life of your vehicle, particula rly th e
engine, and maint aining its value. Even if
the mileage dr iven is low, t he maximum
period of one year from one service to
the next must not be exceeded.
@ Tips
- The information in the Service Reminder
remains sto red even when the vehicle
batte ry is disconnected .
Head-up Display
Applies to vehicles: with Head-up Display
Fig. 14 Example: indicators in the Head-up Display
Fig. 15 Instrument panel: knob fo r the Head-up Dis-
play
The Head-up Display project s cert ain warnings
or selected information from the assistance
systems* or navigation* on the windshie ld.
The display appears within t he driver's field of
vision.
Switching on/ off
.,. Press the knob~ to switch t he Head-up
Display on/off ¢
fig . 15 .
Adjusting the height
The heig ht of th e display can be adjust ed t o
t he individua l dr iver.
.,. Make sure you are seat ed correct ly
co page 134.
.,. Turn th e knob~ t o adjust t he display.
Settings in the MMI
.,. Select: !CARI function button> (Car)* sys-
tems
control button > Driver Assist > Head-
up Display
> Head-up Display content or
Display brightness.
Display content
In the MMI, you can specify w hich information
should be disp layed such as navigat ion infor-
mation* or Night vision assist ant* .
The speed disp lay and some of the red indica-
tor lights cannot be hidden in the MMI.
Display brightness
You can adjust the disp lay bright ness in the
MMI. The display brightness decreases auto -
matically as the amount of light decreases.
The basic level of br ightness is adjusted w ith
t he instr ument ill uminati on
co page 51 . ..,.