the risk of an accident. Read
and follow the important safe-
ty precautions in c:::>
page 248 ,
Tires and vehicle load limits.
-The tire must flex more if the
tire pressure is too low or if
the vehicle speed or load are
too high . This heats the tire up
too much . This increases the
risk of an accident because it
can cause the tire to burst and
result in loss of vehicle con-
trol.
- Incorrect tire pressure in-
creases tire wear and has a
negative effect on driving and
Tire pressure table
Please note that the information
contained in the following table
was correct at the time of print-
ing , and the information is sub-
ject to change . If there are differ-
ences between this information
and the tire pressures specified
on the label on the driver's side B-
pillar, always follow the specifica-
tion on the B-pillar label
~
page 246, fig. 207.
Wheels
braking behavior, which in-
creases the risk of an accident.
Replace lost valve caps to re-
duce the risk of damage to the
tire valves.
Tire pressure that is too low in-
creases fuel consumption.
Audi recommends using the
tire pressure specified for a
normal load c:::>
table on
page 248
or for a full load
when the vehicle is partially
loaded .
Make sure that the tire designa-
tion on your tire matches the des-
ignation on the tire pressure label
and the tire pressure table .
The following table lists recom -
mended tire pressures in cold
tires according to the load and
the size of the tires installed .
247
To Next Page
Loading...
