10
618_023
Navigation system activation
With the navigation-ready version, all the components required
fore the navigation function are already fitted on the vehicle. An
Audi dealer can then activate the navigation function on the
electronic information systems control unit 1 J794 with the aid of
the vehicle diagnostic tester.
After activation of the navigation function, the map data to be
used must also be activated. The necessary activation documents
for doing so are obtainable from the Audi Genuine Accessories
range.
To be able to use the navigation system, two components are
therefore required:
• An activation document for the navigation function
• Up-to-date map data (on SD card) together with activation
document allowing licensed use of the navigation map
MMI display with unactivated
navigation function
Reference
More information on the activation procedure can be obtained from SSP 477, starting on page 98.
To Next Page
Loading...
