26
618_069
The Modular Infotainment System oers three dierent ways of
using a phone in the car. They are:
• Bluetooth interface
• Universal mobile phone pre-wiring (Audi Phone Box)
• Bluetooth car phone online (Audi connect inc. car phone)
Bluetooth interface
Using the Bluetooth interface, a mobile phone can be associated
with the MMI by means of the Hands-Free Profile (HFP). With this
connection method, the mobile phone's address book is also
imported using the Phonebook Access Profile (PbAP*). Using the
voice control facility, the driver can then make a phone call
without taking his/her hands o the wheel.
The Bluetooth interface also supports Bluetooth audio streaming.
This requires connection of a Bluetooth-enabled device to the MMI
via the A2DP Bluetooth profile.
The Bluetooth-enabled device can also be controlled via the
AVRCP* Bluetooth profile. The AVRCP specification supported by
the MIB is 1.3.
If a mobile phone is connected using HFP, a second device can be
simultaneously connected using A2DP.
The PR number for the Bluetooth interface is "9ZX".
Telephone options
Simultaneous connection of two devices to MMI using Bluetooth
Reference
Information on which functions of various mobile terminal devices are supported by Audi vehicles can be found in the data-
base for mobile terminal devices at www.audi.com/bluetooth
Note
The functions of the telephone option "9ZX" are also supported by options "9ZE" and 9ZK".
HFP A2DP
To Next Page
Loading...
Need help?
General
