37
618_063
618_064
618_065
618_066
Key combination for Service on E380
System reset
To restart (reset), the following buttons must be briefly pressed
simultaneously:
• Rotary pushbutton
• Top right soft key
• MENU
Button combination for system reset
Button combinations for the Engineering menu
Key combination for screenshot
Key combination for reset
Engineering menu
The Engineering menu is required, for example, to install a soft-
ware update. To access the menu, the following buttons must be
pressed one after the other and held down:
• BACK
• Top left softkey
Screenshot
A screenshot is a snapshot of the current display on the MMI
screen. To save it, an SD card has to be inserted in the SDF card
reader and the following buttons pressed and held one after the
other:
• Bottom left softkey
• Bottom right softkey
To indicate that the screenshot is being saved, the current screen
display disappears momentarily (white screen).
Screenshots cannot be created on the Entry MIB and Entry plus
MIB.
System reset on Entry MIB
To restart the system on the Entry MIB, the following buttons
must be pressed simultaneously and held for at least five seconds:
• ON/OFF switch
• Forward button
To Next Page
Loading...
Need help?
General
