Audi Q7 - Switching Off Audi Pre Sense; Display in the MMI; Displays When Function is Deactivated

35
Switching o Audi pre sense
Audipresense can be switched o in the MMI. Specific functions
of the overall system are deactivated. This means that no indi-
vidual functions of Audipresense can be deactivated:
The eect of switching o Audipresense on the individual
presensefunctions is explained in the relevant chapters.
If the vehicle is equipped with presensebasic, presenserear or
presensefront, the 1st display will appear in the instrument
cluster when the driver switches Audipresense o. If the vehicle is
only equipped with pre sense city, the 2nd display appears.
637_028
637_030 637_031
Early warning
medium
12:00
Switch o o Audi pre sense
Driver assist Audi pre sense
Note
The driver information display in Fig. 637_031 is expected to change at a later point in time in the instrument cluster.
Audi pre sense:
currently restricted
Emergency braking system
switched o
Displays when function is deactivated
Display in the MMI
1st display 2nd display
If the vehicle is equipped with presensecity and a further
presensefunction, such as presensebasic, both displays are
shown one after the other. The messages are stored in the tab for
driver information and warning lamps and can be retrieved.
< Back
Forwards >
Ξ Contents