Audi Q7 - Settings and Displays; Displays in the Instrument Cluster; Setting and Switching Off Early Warning

34
Settings and displays
Displays in the instrument cluster
Setting and switching o the early warning
Twodierent instrument clusters are fitted in the AudiQ7 - the
Audivirtualcockpit and an analog instrument cluster (with and
without ACC). The MMI screens, MMI radio and MMI naviga-
tionplus are installed in conjunction with the MMI screen.
The instrument cluster and MMI screen displays dier accordingly.
The instrument cluster and MMIscreen displays are shown in the
chapters on Audipresense using the analog instrument cluster
with ACC, the MMI-screen and MMI navigationplus.
The early warning function of Audipresensecity and pre sense
front can be set and switched o in the MMI. The following setting
options are available:
• The settings for the "early" "medium" or "late" early warning are
active until another selection is made in the MMI.
• If the early warning has been set to "o", the early warning is
switched on again after turning the ignition back on
1)
. The
"late" setting is activated by the system. This system setting can
change at a later date to the extent that the system activates
the value used before the early warning was switched o.
o The audible and visual early warning is o.
early The audible and visual early warning is adjusted to early.
medium The audible and visual early warning is adjusted to medium.
late The audible and visual early warning is adjusted to late.
1)
Not available in all countries.
637_027
Early warning
o
early
medium
late
12:00
Switch o Audi pre sense
Driver assist Audi pre sense
Settings in the CAR menu
< Back
Forwards >
Ξ Contents