30
637_025 637_026
Pre sense city
With Audipresensecity, the following actions can be initiated:
• Audible and visual early warnings
• Acute warning by brake jerk
• Pre-charging of the brake system
• Reconfiguration (alteration of the parameters) of hydraulic
brake assist
1)
Not available in all countries.
Audipresensecity is a "camera based" system. To use Audi pre
sensecity, therefore, the front camera for driver assistance
systems R242 must be fitted. The front camera continuously
monitors the trac ahead of the vehicle. Among other things, it
makes allowance for the distance to and speed of other objects
relative to one's own vehicle.
Response to vehicles Response to pedestrians
The following preconditions must be met in order to activate the
system:
• presensecity can respond to vehicles which are travelling in the
same direction and which have stopped or are stationary
• presensecity does not respond to crossing or oncoming trac
• presensecity is active upwards of a speed of about 10kph
Response to vehicles
• presensecity can warn against vehicles up to a speed of
250kph
• presensecity can initiate braking up to a speed of 85kph
Collision warning phase
If the vehicle approaches another vehicle which is travelling in the
same direction or has stopped or is stationary at a speed of of up
250kph, resulting in a critical driving situation, the instrument
cluster gives the driver audible and visual early warnings when set
limits are exceeded.
637_041
Audi pre sense
• Automatic braking up to emergency braking intensity
• Activation of the hazard warning flashers (emergency braking
warning)
1)
Depending on the severity of the critical driving situations, Audi
pre sense city can warn the driver first and then, if necessary,
initiate braking. The system can, under certain conditions, detect
the following scenarios:
• Vehicle ahead
• Pedestrians standing in the same lane or approaching the same
lane as the vehicle