43
This driver information is displayed for about10seconds after
turning on the ignition because presensecity is unavailable during
this time. The reason is that the front camera for driver assistance
systems R242 is required for about 10seconds until the camera is
ready.
In the MMI the driver can select whether the presense early
warning or presense actions are to be shown on the head-up
display.
If the "Driver assist" option is activated in the CAR Menu in the
MMI under "Head-up display"
1)
and "Display content", presense
early warnings and inputs will also be shown on the head-up
display.
637_076
637_113
1)
Optional equipment.
Head-up displays
Settings in the CAR menu
637_084
Trac signs
Navigation messages
Head-up display Display unit
Driver assist
Night vision assist warning symbol
100kph