Audi S5 - Anti-lock brake system (ABS)

Instruments and warning/indicator lamps 15
Controls Safety Driving tips General maintenance Self-help Technical data
Warning and indicator lamps
Overview
The warning and indicator lamps indicate a number of
different functions and possible faults.
Fig. 7 Instrument cluster with warning and indicator lamps
Note
A number of functions are monitored by the auto-check control
⇒ page 20. If a malfunction should occur, this will be shown by the
display in the instrument cluster either with a red symbol (priority 1
– serious malfunction) or a yellow symbol (priority 2 – other
malfunction or item requiring attention).
Applies to vehicles: with petrol engine
Engine management 
This warning lamp monitors the engine management
system on petrol engines.
The  warning lamp (Electronic Power Control) lights up when the
ignition is switched on to show that the lamp is working properly.

Engine management ⇒ page 15

Electronic stabilisation program (ESP) ⇒ page 16

Airbag system ⇒ page 16

Left turn signals ⇒ page 16

Trailer turn signals* ⇒ page 17

Seat belt warning lamp ⇒ page 17

Emission control system ⇒ page 17

Main beam headlights ⇒ page 17

Right turn signals ⇒ page 16

Cruise control system* ⇒ page 17

Anti-lock brake system (ABS) ⇒ page 17

Electro-mechanical parking
brake/Audi hold assist*
⇒ page 18

Fault in brake system ⇒ page 19
document_0900452a81793dcc.book Seite 15 Mittwoch, 21. März 2007 5:42 17