Seats and storage 81
Controls Safety Driving tips General maintenance Self-help Technical data
Applies to vehicles: with load-through hatch
Load-through hatch
You can use the load-through hatch and bag to transport
objects safely inside the vehicle.
Opening the load-through hatch
– In the passenger compartment, pull down the centre rear
armrest.
– Pull the release catch ⇒ fig. 89 -arrow- and fold the cover
of the load-through hatch down into the passenger
compartment.
– Open the boot lid.
– Working from the luggage compartment, push the bag
through the opening.
– Secure the bag ⇒ page 81.
Closing the load-through hatch
– Open the boot lid.
– Take the bag out of the load-through hatch.
– Fold the cover of the load-through hatch back up from
inside the vehicle until it engages.
– Fold up the centre armrest again if desired.
– Close the boot lid.
WARNING
Loose objects must be transported in the bag, as the bag can be
secured. Individual objects cannot be secured - Risk of accident!
Note
• You can also open the load-through hatch from the luggage
compartment. Press down the release catch and push the cover
forwards.
• The load-through hatch can be locked and unlocked from inside
the vehicle using the emergency key ⇒ fig. 89.
Applies to vehicles: with load-through hatch
Securing the transport bag
The transport bag must be secured in the luggage
compartment.
Fig. 89 In the rear seat:
Opening the lid of the
load-through hatch
Fig. 90 Luggage
compartment:
Securing the bag
document_0900452a81793dcc.book Seite 81 Mittwoch, 21. März 2007 5:42 17
To Next Page
Loading...
