76
! WARNING !
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
NO USER SERVICEABLE PARTS INSIDE.
PLEASE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safety Instructions
Please read all of these instructions and save them for later reference before connecting
the DC power adapter to the mains and powering up iD44.
To prevent electrical shock and fire hazard follow all instructions on the 12VDC power
supply. iD44 itself does not operate with any high voltage mains supply inside the unit
but appropriate safety measures should still be adhered to regarding the AC/DC supply.
Please ensure you only use the supplied iD44 power supply. We cannot recommend
the useage of third party power supplies. In the event of a power supply failure do not
open the 12VDC supply. If required, please contact
Audient support so that a suitable
repacment can be sourced.
audient.com/support
iD44 utilises an external switch-mode power supply that is very quiet and rated at 2A.
This switch-mode design will accept any A.C line voltage from 90v to 264v @ 47-63Hz.
Therefore the unit will work anywhere in the world but please ensure your A.C mains line
voltage is within this specification.
Consult a qualified technician if you suspect diculties. Do not attempt to tamper
with the power supply or mains voltages - HAZARDOUS TO HEALTH. Ensure that the
appropriate international pin adapter is fitted to the power supply before insertion into
the mains socket.
Important Safety Instructions
1. Read these instructions
2. Keep these instructions
3. Heed all warnings
4. Follow all instructions
5. Do not use this equipment near water
6. Clean only with dry cloth
7. Do not install near any heat sources such as radiators, heat registers, stoves, or
other equipment (including amplifiers) that produce heat
8. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polaized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, cosult an electrician for replacement of the obsolete outlet
9. Protect power cords from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the equipment
Only use attachments/accessories specified by the manufacturer
10. Unplug this equipment during lightning storms or when unused for long periods
of time
11. Refer all servicing to qualified service personnel. Servicing is required when the
equipment has been damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the equipment,
the equipment has been exposed to rain or moisture, does not operate normally,
or has been dropped
12. For products that are a mains powered device: The equipment shall not be
exposed to dripping or splashing and no objects filled with liquids (such as
vases) shall be placed on the equipment.
13. Under the influence of electrostatic phenomenon, the product may
malfunction and require the user to power cycle the unit.
Safety Information Safety Information
To Next Page
Loading...
