Audient iD44 - Installation

1514
Launch the iD Mixer Application
Launch the iD mixer application
by finding it in the following folder:
Macintosh HD > Applications > iD
Start > All Programs > Audient > iD
For more information on the mixer
application feature set, please refer to
page 17 of this manual onwards.
Check for Firmware Updates
If your computer is connected to the
internet, the iD app will check for firmware
updates whenever a unit is connected. If
there is a firmware update available then
the iD app will notify you.
You can manual check for updates by
going to the Help menu and selecting
‘Check for Updates’. It will notify you if
you’re on the latest version of firmware.
Firmware Update
When there is a firmware update, you can
select ‘From audient.com’ to download
the latest version automatically (or select
‘From file’ to install a local firmware file).
The latest version number will be
retrieved from our servers and will be
displayed (as shown above). Press next
to continue with the firmware update.
Press ‘update’ to install it. Once complete
reboot iD44 using the power switch to
apply it.
Mixer App & Firmware Update Hardware Features
Hardware Features