Need help?Do you have a question about the Audio Technica 1600 Series and is the answer not in the manual?
General| Type | Wireless Microphone System |
|---|---|
| Impedance | 250 ohms |
| Dynamic Range | >109 dB (A-weighted) |
| Receiver Output Connector | Balanced XLR |
| Receiver Power Supply | 12V DC |
| Polar Pattern | Cardioid |
| Signal-to-Noise Ratio | >109 dB (A-weighted) |
| Phantom Power Requirements | Not applicable (battery powered) |
| Connector | XLR |
| Operating Range | 100' (30 m) (open range environment) |
| Accessories Included | AC adapter, rack mount kit, antennas, user manual |
Guidelines for optimal receiver placement to minimize reflections and interference from noise sources.
Details on connecting balanced and unbalanced audio outputs to mixers or other audio equipment.
Instructions for attaching UHF antennas, positioning them for best reception, and remote location options.
Information on connecting the AC adapter to the receiver's DC power input.
Identification and description of front and rear panel controls, indicators, and connectors on the receiver.
Instructions for powering the receiver on/off and making frequency selections via manual or scan modes.
Guidance on installing AA batteries, checking battery condition, and understanding indicators.
Details on connecting audio inputs to UniPak transmitters and antenna placement for handheld units.
Steps for setting receiver frequency, matching transmitter frequency, and adjusting squelch.
Procedures for adjusting transmitter input levels and RF power output for optimal performance.
Ten essential tips to ensure the best possible results and performance from the wireless system.
To Next Page