EasyManua.ls Logo

Audio Technica ATW-1101

Audio Technica ATW-1101
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
System 10
Digital Wireless System
Installation and Operation
ATW-1101
UniPak
®
Transmitter System
ATW-1101/G
Guitar System
ATW-1101/H
Headworn Microphone System
ATW-1101/H92
Miniature Headworn Microphone System
ATW-1101/H92-TH
Miniature (beige) Headworn Microphone System
ATW-1101/L
Lavalier Microphone System
ATW-1102
Handheld Microphone System
Question and Answer IconNeed help?

Do you have a question about the Audio Technica ATW-1101 and is the answer not in the manual?

Audio Technica ATW-1101 Specifications

General IconGeneral
Operating Frequencies2.4 GHz ISM band
Dynamic Range>109 dB (A-weighted), typical
Total Harmonic Distortion<0.05% typical
Operating Range30 m (100') typical
Operating Temperature Range0° C to +40° C (32° F to 104° F)
Frequency Response20 Hz to 20 kHz
Audio Sampling24 bit / 48 kHz
Maximum Output LevelXLR, balanced: 0 dBV, 1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply100-240V AC (50/60 Hz) to 12V DC 0.5A
Dimensions190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
Net Weight290 grams (10.2 oz)
RF Output Power10 mW
BatteriesTwo 1.5V AA
Battery Life>7 hours (alkaline)
Dimensions70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Net Weight (without batteries)100 grams (3.5 oz)
RF Output Power10 mW
BatteriesTwo 1.5V AA
Battery Life>7 hours (alkaline)
Dimensions254.8 mm (10.03") long, 50.0 mm (1.97") diameter
Net Weight (without batteries)280 grams (9.9 oz)

Summary

Safety and Precautions

General Safety Warnings

General warnings to reduce risk of fire, electric shock, rain, or moisture exposure.

Important Safety Instructions

Key instructions for safe operation, installation, and maintenance of the equipment.

Pacemaker and AICD Device Precautions

Advice for individuals with implanted cardiac devices regarding RF energy.

Receiver Installation and Setup

ATW-R1100 Receiver Controls and Indicators

ATW-T1002 Handheld Transmitter Setup

ATW-T1001 UniPak Transmitter Setup

System Operation

Startup and Transmitter Status

Procedure for powering on the system and understanding transmitter status indicators.

System ID Setting and Pairing

Single System Pairing

Instructions for pairing a single transmitter with a receiver.

Multiple Systems Pairing

Steps for pairing multiple transmitter-receiver systems.

Tips for Best Results and Performance

Related product manuals