EasyManua.ls Logo

Audio Technica ATW-2110

Audio Technica ATW-2110
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2000 Series Professional
UHF Wireless Systems
ATW-2110 UniPak
Transmitter System
ATW-2120 Handheld Dynamic Microphone System
Installation and Operation
Question and Answer IconNeed help?

Do you have a question about the Audio Technica ATW-2110 and is the answer not in the manual?

Audio Technica ATW-2110 Specifications

General IconGeneral
System TypeWireless
ModulationFM
RF Output Power10 mW
Microphone TypeHandheld
Microphone ElementDynamic
Polar PatternCardioid
Max Operating Range100 m (line of sight)
Signal-to-Noise Ratio100 dB
Simultaneous ChannelsUp to 8
Receiver OutputsXLR, 1/4" (6.3 mm) phone
Dynamic Range>100 dB (A-weighted)
ConnectorXLR
Dimensions (Receiver)210 x 44 x 130 mm
Transmitter Battery Life8 hours (alkaline)
Receiver TypeDiversity
THD<0.5% (1 kHz, max deviation)

Summary

Receiver Installation Guide

Receiver Front Panel Controls and Indicators

Front Panel Controls Description

Explanation of the receiver's power switch, buttons, and LCD window.

Front Panel Indicators Explanation

Understanding RF signal, tuner operation, channel, and AF level indicators.

Receiver Rear Panel Controls and Connectors

Transmitter Controls and Battery Installation

System Operation Procedures

Receiver and Transmitter Power On Sequence

Correct order for powering on receiver and transmitter for system use.

Setting Audio Levels for ATW-T220

Adjusting audio input levels for the handheld transmitter for optimal sound.

System Operation and Level Adjustments

Setting Levels for ATW-T210 UniPak Transmitter

Adjusting UniPak transmitter trim controls for mic/instrument inputs.

Audio-Technica 2000 Series Specifications

Frequency Plan and Best Practices

Related product manuals