Need help?Do you have a question about the Audio Technica ATW-3212/C510DE2 and is the answer not in the manual?
General| Type | Wireless Microphone System |
|---|---|
| System Type | Diversity |
| RF Frequency Band | UHF |
| Transmitter Type | Handheld |
| Microphone Element | Condenser |
| Polar Pattern | Cardioid |
| Modulation | FM |
| Battery Life | 8 hours |
| Battery Life (transmitter) | 8 hours |
| Connector (transmitter) | XLR |
| Operating Range | 100 m |
| Operating Range (line of sight) | 100 m |
| Receiver Type | Rackmount |
| Receiver Mounting | Rackmount |
| Receiver Outputs | XLR, 1/4" |
| Dynamic Range | 100 dB |
| THD | < 0.5% |
| Signal-to-Noise Ratio | > 100 dB |
| Power Supply | 12V DC |
| Connector (receiver) | XLR, 1/4" |
| Dimensions (Receiver) | 210 x 44 x 170 mm |
| Weight (Receiver) | 1.2 kg |
| Dimensions (Transmitter) | 250 x 50 mm |
| Weight (Transmitter) | 290 g |
| Receiver Rack Size | 1/2 RU |
Safety warnings, operational cautions, and battery handling guidelines.
Step-by-step guide for inserting batteries into the ATW-T3201 transmitter.
Step-by-step guide for inserting batteries into the ATW-T3202 transmitter.
Explanation of indicators and information shown on the ATW-R3210 receiver's main display screen.
Explanation of indicators and information on the ATW-R3210 receiver's level meter screen.
Explanation of indicators and information shown on the ATW-T3201/ATW-T3202 transmitter display screens.
Step-by-step guide for basic receiver and transmitter power-up and initial operation.
Procedure for synchronizing receiver and transmitter settings using Infrared (IR) technology.
Guide to accessing and modifying settings on the ATW-R3210 receiver via its menu.
Guide to accessing and modifying settings on the ATW-T3201/ATW-T3202 transmitters via their menus.
A table listing all configurable settings for the ATW-R3210 receiver.
Procedure for setting the receiver's group and channel for frequency selection.
How to manually set the operating frequency for the ATW-R3210 receiver.
How to use IR SYNC to configure transmitter settings from the receiver.
A table listing all configurable settings for the ATW-T3201 and ATW-T3202 transmitters.
Procedure for setting the transmitter's group and channel for frequency selection.
How to manually set the transmission frequency for the transmitters.
How to adjust the input gain level for the transmitter.
Common issues and their solutions for the ATW-R3210 receiver, including power, output, and noise problems.
Common issues and their solutions for ATW-T3201/T3202 transmitters, including power, output, and noise.
To Next Page