To Next PageTo Next Page
Need help?Do you have a question about the Audio Technica System 10 and is the answer not in the manual?
Power| receiver power supply | 100-240V AC (50/60 Hz) to 12V DC 0.5A |
|---|---|
| unipak transmitter rf output power | 10 mW |
| handheld transmitter rf output power | 10 mW |
Battery| unipak transmitter battery type | Two 1.5V AA |
|---|---|
| unipak transmitter battery life | >7 hours (alkaline) |
| handheld transmitter battery type | Two 1.5V AA |
| handheld transmitter battery life | >7 hours (alkaline) |
Operating Environment| operating frequencies | 2.4 GHz ISM band |
|---|---|
| operating range | 30 m (100') |
| operating temperature range | 0° C to +40° C (32° F to 104° F) |
Weight and Dimensions| receiver dimensions | 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D |
|---|---|
| receiver net weight | 290 grams (10.2 oz) |
| unipak transmitter dimensions | 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D |
| unipak transmitter net weight | 100 grams (3.5 oz) |
| handheld transmitter dimensions | 254.8 mm (10.03") long, 50.0 mm (1.97") diameter |
| handheld transmitter net weight | 280 grams (9.9 oz) |
Lists 10 essential safety guidelines for users of the equipment.
Advises users with medical devices on RF exposure and placement.
Covers FCC/IC compliance, RF exposure, and modification warnings.
Guidelines for optimal placement of the receiver unit.
Details on connecting audio outputs and power supply.
Instructions for positioning receiver antennas for best reception.
Identifies and explains the front panel buttons and indicators.
Identifies and explains the rear panel connectors and controls.
Covers battery insertion and the status indicator light.
Explains mute function, pairing, level control, and system ID display.
Covers battery insertion and the status indicator light.
Explains mute function, input, antenna, pairing, and level control.
Steps for powering on the receiver and transmitter.
Guidance on setting optimal audio input levels for transmitters.
Instructions for setting System ID and pairing transmitters with receivers.
Recommendations for optimizing system performance.
Explanation of how the system selects frequencies automatically.
Technical details for the entire wireless system.
Technical details for UniPak and Handheld transmitters.
