Do you have a question about the Audio Technica AT2020USB-X and is the answer not in the manual?
Cable length | 2 m |
---|---|
Control type | Buttons, Rotary |
Plug and Play | Yes |
Product color | Black |
Windows operating systems supported | Windows 10, Windows 11, Windows 8.1 |
Power source | USB |
Input voltage | 5 V |
Device interface | 3.5 mm (1/8\ |
USB connector type | USB Type-C |
Connectivity technology | Wired |
Cables included | USB Type-C to USB Type-A |
Number of products included | 1 pc(s) |
Type | PC microphone |
Bit rate | 24 bit |
Sample rate | 96 kHz |
Volume control | Rotary |
Voice coil type | Dynamic |
Microphone frequency | 20 - 20000 Hz |
Microphone Total Harmonic Distortion (THD) | 1 % |
Output impedance | 32 Ω |
Height | 142 mm |
---|---|
Diameter | 52 mm |
Microphone weight | 373 g |
Important warnings and cautions to ensure safe operation and prevent damage.
How to select the microphone as the input/output device in Windows 11 sound settings.
Verifying that specific apps have permission to access the microphone.
Ensuring desktop applications can access the microphone in Windows 11.
How to configure microphone properties like level and sample rate in Windows 11.
Navigating through sound settings to access microphone properties in Windows 11.
Setting microphone levels via the 'Levels' tab in Windows 11 properties.
Confirming microphone selection in recording tab for Windows 11.
Allowing microphone use for apps in Windows 8.1 privacy settings.
Adjusting playback levels for the microphone in Windows 8.1 properties.