Audio Technica AT2020USB-XP User Manual

38
7
In the "Output" tab, confirm that the product is selected.
• If a device other than the product is being used to output sound, select the other device from lists.
• Use "Output volume" to adjust the playback level from the computer.
• You can use "Balance" to set the balance between the left and right volumes.
• If you are using commercially available recording software to record audio, refer to “Privacy and Security
settings" (p. 39) settings to configure the settings.

Audio Technica AT2020USB-XP Specifications

General

Headphone out	Yes
Device interface	3.5 mm (1/8\
USB connector type	USB Type-C
Connectivity technology	Wired
Type	PC microphone
Bit rate	24 bit
Sample rate	192 kHz
Volume control	Rotary
Microphone frequency	20 - 20000 Hz
Microphone Total Harmonic Distortion (THD)	1 %
Output impedance	32 Ω
Cable length	2 m
Control type	Buttons, Rotary
Product color	Black
Windows operating systems supported	Windows 10, Windows 11
Cables included	USB Type-C to USB Type-A
Number of products included	1 pc(s)
Power source	USB
Input voltage	5 V

Weight and Dimensions

Height	142 mm
Diameter	52 mm
Microphone weight	375 g