Audio Technica AT2020USB-XP User Manual

58
?
Recorded audio is played back at twice the normal speed
• The sampling rate setting differs from that set in the "Playback" or "Recording" tab on the Windows PC you are
using or in the "Output" or "Input" tab on the Mac you are using. Match the sampling rate settings. For details on
the settings, refer to "Computer settings (Windows)" (p. 10) or "Computer settings (macOS)" (p. 35).
• The product may not operate correctly depending on the computer you are using. Countermeasures for these
situations are provided on the Audio-Technica website.

Audio Technica AT2020USB-XP Specifications

General

Headphone out	Yes
Device interface	3.5 mm (1/8\
USB connector type	USB Type-C
Connectivity technology	Wired
Type	PC microphone
Bit rate	24 bit
Sample rate	192 kHz
Volume control	Rotary
Microphone frequency	20 - 20000 Hz
Microphone Total Harmonic Distortion (THD)	1 %
Output impedance	32 Ω
Cable length	2 m
Control type	Buttons, Rotary
Product color	Black
Windows operating systems supported	Windows 10, Windows 11
Cables included	USB Type-C to USB Type-A
Number of products included	1 pc(s)
Power source	USB
Input voltage	5 V

Weight and Dimensions

Height	142 mm
Diameter	52 mm
Microphone weight	375 g