Audio Technica AT2020USB-XP User Manual

5
❼ Noise-reduction indicator lamp
When the noise-reduction function is on, the noise-reduction indicator lamp lights in three levels depending on the level.
❽ Automatic gain control button
Turns the automatic gain control function on/off. When the function is turned on, the gain is automatically corrected
when the input signal is excessive to prevent output distortion.
➒ Noise-reduction button
Turns the noise-reduction function on/off. When turning it on reduces ambient steady noise. The function level can be
set in 3 levels each time the button is pressed.
➓ USB terminal (USB Type-C™)
Use to connect the included USB cable.
⓫ 3/8" Stand mounting screw hole
Use when attaching the stand.
⓬ Headphone jack (3.5 mm (1/8") stereo mini-jack)
Use to connect headphones.

Audio Technica AT2020USB-XP Specifications

General

Headphone out	Yes
Device interface	3.5 mm (1/8\
USB connector type	USB Type-C
Connectivity technology	Wired
Type	PC microphone
Bit rate	24 bit
Sample rate	192 kHz
Volume control	Rotary
Microphone frequency	20 - 20000 Hz
Microphone Total Harmonic Distortion (THD)	1 %
Output impedance	32 Ω
Cable length	2 m
Control type	Buttons, Rotary
Product color	Black
Windows operating systems supported	Windows 10, Windows 11
Cables included	USB Type-C to USB Type-A
Number of products included	1 pc(s)
Power source	USB
Input voltage	5 V

Weight and Dimensions

Height	142 mm
Diameter	52 mm
Microphone weight	375 g