Audio Technica AT2040USB User Manual

34
10
Select the "Advanced" tab under the "Playback" tab, select the same items as the sample rate and bit rate you
changed in step 8, and then click "OK".
• Whenever the sample rate of the microphone is changed, the sample rate setting in "Playback” or “Recording"
must be the same.
11
When a "Device In Use" message appears, click "Yes".
Caution
• If the mute indicator lamp is blinking, the sample rate setting differs from that set in the "Playback" or
"Recording" tab on the Windows PC you are using. Match the sample rate settings.

Audio Technica AT2040USB Specifications

General

Type	PC microphone
Bit rate	24 bit
Sample rate	96 kHz
Microphone mute	Yes
Microphone frequency	80 - 16000 Hz
Microphone Total Harmonic Distortion (THD)	1 %
Device interface	3.5 mm (1/8\
USB connector type	USB Type-C
Connectivity technology	Wired
Cables included	USB Type-C to USB Type-A
Number of products included	1 pc(s)
Cable length	2 m
Product color	Black
Windows operating systems supported	Windows 10, Windows 11
Power source	USB
Input voltage	5 V
Output impedance	32 Ω

Weight and Dimensions

Height	145.3 mm
Diameter	52 mm
Microphone weight	600 g