Audio Technica AT2040USB User Manual

51
Using the low cut switch
The product can be set to pick up as little low-frequency environmental noise (footsteps, air conditioning noise, etc.),
room echoes, and machine vibrations as possible. Turn the low cut switch ON ( ).
➊ Loc cut switch ON
➋ Loc cut switch OFF
Muting the microphone
Turn the muting of the microphone on/off.
1
Touch the touch sensor for mute.
• Each time you touch this control, muting turns on (lights red) or off (lights blue).

Audio Technica AT2040USB Specifications

General

Type	PC microphone
Bit rate	24 bit
Sample rate	96 kHz
Microphone mute	Yes
Microphone frequency	80 - 16000 Hz
Microphone Total Harmonic Distortion (THD)	1 %
Device interface	3.5 mm (1/8\
USB connector type	USB Type-C
Connectivity technology	Wired
Cables included	USB Type-C to USB Type-A
Number of products included	1 pc(s)
Cable length	2 m
Product color	Black
Windows operating systems supported	Windows 10, Windows 11
Power source	USB
Input voltage	5 V
Output impedance	32 Ω

Weight and Dimensions

Height	145.3 mm
Diameter	52 mm
Microphone weight	600 g