Audio Technica AT2040USB User Manual

56
Specifications
System requirements
USB 2.0 compliant
Supported OS Windows 10, Windows 11
macOS Catalina, macOS Big Sur, macOS Monterey, macOS Ventura
(Please check the product's web page for the latest information.)
Element
Dynamic
Polar pattern
Hypercardioid
Frequency response
80-16,000 Hz
Low cut
80 Hz, 18 dB/octave
Power supply
USB power (5 VDC)
Bit depth
16 bit/24 bit
Supported sampling rates
44.1 kHz/48 kHz/88.2 kHz/96 kHz
Controls
Headphone level control, Mix control, Low cut, Mute
Dimensions
145.3 mm (5.7”) long, 52 mm (2.0”) maximum body diameter
Weight
About 600 g (21 oz)
Output connector
USB Type-C
Headphone output
77 mW (at 1 kHz, 1% T.H.D., 32 ohms)
Headphone jack
3.5 mm (1/8") stereo mini-jack
Included accessories
AT8487 mounting clamp, 5/8”-27 to 3/8”-16 threaded adapter, USB cable
(about 2.0 m (6.6'), USB Type-C to USB Type-A), USB conversion adapter
(USB-Type-A to USB Type-C)
• For product improvement, the product is subject to modification without notice.

Audio Technica AT2040USB Specifications

General

Type	PC microphone
Bit rate	24 bit
Sample rate	96 kHz
Microphone mute	Yes
Microphone frequency	80 - 16000 Hz
Microphone Total Harmonic Distortion (THD)	1 %
Device interface	3.5 mm (1/8\
USB connector type	USB Type-C
Connectivity technology	Wired
Cables included	USB Type-C to USB Type-A
Number of products included	1 pc(s)
Cable length	2 m
Product color	Black
Windows operating systems supported	Windows 10, Windows 11
Power source	USB
Input voltage	5 V
Output impedance	32 Ω

Weight and Dimensions

Height	145.3 mm
Diameter	52 mm
Microphone weight	600 g