Audio Technica AT2040USB User Manual

6
Setting up the product
For best results, set up the product so that it is facing the sound source. When using it to record voices, place it directly
in front of the speaker/singer. Do the same thing when recording sound such as acoustic guitar, drums, or piano. Before
using the product, try setting it up in various positions, to discover how best to record sound in your current environment.
Attaching to a commercially available microphone
stand or boom arm
Use the AT8487 mounting clamp to secure the microphone to a microphone stand or boom arm.
➊ AT8487 mounting clamp

Audio Technica AT2040USB Specifications

General

Type	PC microphone
Bit rate	24 bit
Sample rate	96 kHz
Microphone mute	Yes
Microphone frequency	80 - 16000 Hz
Microphone Total Harmonic Distortion (THD)	1 %
Device interface	3.5 mm (1/8\
USB connector type	USB Type-C
Connectivity technology	Wired
Cables included	USB Type-C to USB Type-A
Number of products included	1 pc(s)
Cable length	2 m
Product color	Black
Windows operating systems supported	Windows 10, Windows 11
Power source	USB
Input voltage	5 V
Output impedance	32 Ω

Weight and Dimensions

Height	145.3 mm
Diameter	52 mm
Microphone weight	600 g